Tuesday, April 5, 2016

Tired of Traffic? New Ford Fusion Offers Technology to Make the Car Stop and Go on Its Own to Ease Stressful Commutes

  • Study shows average U.S. driver spends up to 1.5 stressful hours a week stuck in traffic
  • New Ford Fusion offers adaptive cruise control with stop-and-go technology to help take the edge off stressful traffic
  • Adaptive cruise control with stop-and-go is one of 20 driver-assist features available on the new 2017 Ford Fusion arriving at dealers this spring

DEARBORN, Mich., April 5, 2016 – Ford can’t prevent aggravating traffic congestion, but it’s adding something new to help make traffic less stressful.

A new stop-and-go technology available for the 2017 Fusion, which piggybacks on the existing adaptive cruise control feature, can help drivers experience less stress on the road. When activated stop-and-go automatically accelerates and brakes for the driver while maintaining a safe distance from the vehicle ahead.

According to the 2015 Urban Mobility Scorecard released by Texas A&M Transportation Institute, America’s drivers spent 6.9 billion hours stuck in traffic in 2014, an average of nearly an hour a week wasted. Drivers fighting traffic in the most gridlocked cities – New York, Los Angeles and Washington, D.C. – found it significantly worse, losing nearly an hour and a half, sometimes more.

Now, whether on a long-distance trip or the daily commute, customers of the 2017 Fusion equipped with adaptive cruise control with stop-and-go technology can drive with less stress.

Using dedicated steering wheel buttons, adaptive cruise control with stop-and-go allows drivers to set cruise control speed and following distance from the vehicle ahead. The semi-autonomous technology can automatically adjust the set speed for comfortable travel – much like a human driver would – bringing the car to a full stop when traffic halts. If the car has to stop for more than three seconds, the driver can tap the resume button or accelerator and the car returns to its preset speed. This assures the driver is paying attention in the event of a long pause in traffic.

Adaptive cruise control employs a combination of sensors and software. When activated, the technology uses an advanced radar-and-camera based system, which reads the road every 50 milliseconds – tracking traffic and adjusting Fusion’s cruise control according to traffic flow. In slow traffic, with minimal driver input, the car can automatically brake itself to a stop, then resume travel up to set speed and following distance.

“When testing this system, we traveled to cities like Chicago and Los Angeles, heading straight for the worst possible congestion,” says Scott Lindstrom, Ford driver-assist technologies manager. “It was important for us to test this system under conditions the average driver encounters every workday.”

Adaptive cruise control with stop-and-go is a great tool for dealing with traffic, but for unpredictable moments Pre-Collision Assist with Pedestrian Detection, part of the overall technology, employs the same sensors and camera to watch the road ahead for potential collisions with a vehicle or pedestrian. When a situation is detected, the system provides a visual and audible warning to the driver, pre-charges the brakes and, if necessary, can then automatically apply up to full braking force. This can help reduce the severity of, or even eliminate, some frontal collisions.

The 2017 Fusion is the first Ford vehicle in North America to offer adaptive cruise control with stop-and-go and Pre-Collision Assist with Pedestrian Detection – among 20 driver-assist technologies available across the entire Fusion lineup, including Fusion Hybrid and Fusion Energi. Stop-and-go will be added to three new Ford products within the next two years.

The new Fusion arrives at Ford dealers this spring.

No comments:

Post a Comment